Customer Setups

This page will highlight some of the notable setups being run by my clients.  Where possible I've included the information directly here on the site, but in some cases I've just linked to their site.  (Email me if you think you have a noteworthy setup!)
 
 

	This has to be the coolest setup I've ever seen.  Alex has created the most compact, well thought out transport system I have seen so far.  He has built his setup around my 200mw transmitter/receiver set.
	The outside of the case has all the connections necessary for deploying the system, as well as the ability to charge the onboard 12v battery.  From left to right, you can see the on/off switch for the onboard battery, battery charging jacks, A/V connections, power jack for the receiver, and auxiliary power jacks to power additional 12v accessories.
	Here you can see the system deployed.  On the left is Alex's 200mw transmitter with 5v battery pack piggybacking the transmitter/camera unit.  Next to that is the 2.4ghz video receiver connected to the case.  Note that the receiver has only a single audio channel.  Alex is using his other audio channel to capture ground based audio using a pre amplified lapel mike.
	Everything stows compactly inside the case.  All the A/V cables are captured in 'wire tamers' that have been stuck to the inside of the lid.  Battery packs for the transmitter are velcro'd to the lid also, along with the ground based microphone.  A very compact camcorder can be seen at the front of the case.  A 12v sealed gel cell battery is cleverly hidden behind the tasteful logo at the back of the case.  The receiver is to the left of gel cell, and the transmitter/camera is to the right.